next up previous contents
Next: STOP Up: Keywords Previous: SIGMA

SPINDLE

Specifies the spindle angle in degrees. If the option AXIS is used the spindle axis can be specified: spindle axis X, spindle axis Y, or spindle axis Z. The Z-axis is the direction of the direct beam, and is normally not used. The X-axis is the axis in the horizontal plane, perpendicular to the direct beam, whereas the Y-axis is the axis in the vertical plane (and perpendicular to the direct beam).


format real or axis followed by X, Y, or Z defaults spindle 0.0 spindle axis X examples spindle -5.0 spindle axis Y



Home Page Crystal and Structural Chemistry