For other information, see the Ghostscript overview.
ps2pdf is implemented as a very small command script (batch file) that invokes Ghostscript, selecting a special "output device" called pdfwrite. In order to use ps2pdf, the pdfwrite device must be included in the makefile when Ghostscript was compiled; see the documentation on building Ghostscript for details: this is currently the case on all platforms, in Ghostscript as we distribute it.
The usage for ps2pdf is
ps2pdf [options] input.[e]ps output.pdf
or, on Unix systems and some versions of Windows NT and OS/2
ps2pdf input.[e]ps
which is equivalent to
ps2pdf input.[e]ps input.pdf
There are actually several different ps2pdf* scripts: the name ps2pdf above refers to any of them.
Note that if you specify a value for PDFSETTINGS, this chooses PDF 1.3 or 1.4 output depending on the value of PDFSETTINGS: this overrides the output format specified by the script name. You can still specify the output format by using -dCompatibilityLevel= after -dPDFSETTINGS=.
All of these scripts actually call a script named ps2pdfwr or ps2pdfxx. The Unix ps2pdfwr script assumes that the Ghostscript executable is named gs; it is unlikely that you will need to change this. The DOS and MS Windows ps2pdfxx.bat script uses the value of the GSC environment variable, if defined, as the name of the executable; otherwise the script assumes the executable is named gswin32c. So in these environments, if the executable has a different name, you must set GSC to the name of the executable.
By default Ghostscript determines viewing page orientation based on the dominant text orientation on the page. Sometimes, when the page has text in several orientations or has no text at all, wrong orientation can be selected.
Acrobat Distiller parameter AutoRotatePages controls the automatic orientation selection algorithm. On Ghostscript, besides input stream, Distiller parameters can be given as command line arguments. For instance: -dAutoRotatePages=/None or /All or /PageByPage.
When there is no text on the page or automatic page rotation is set to /None an orientation value from setpagedevice is used. Valid values are: 0 (portrait), 3 (landscape), 2 (upside down), and 1 (seascape). The orientation can be set from the command line as -c "<</Orientation 3>> setpagedevice" using Ghostscript directly but cannot be set in ps2pdf. See Limitations below.
Ghostscript passes the orientation values from DSC comments to pdfwrite driver but they are effectively ignored there. This appears to be consistent with Distiller 5 behavior.
The options in the command line may include any switches that may be used with Ghostscript's PostScript and PDF interpreter (see here for a complete list), although almost none of them are useful with ps2pdf. The following may be useful:
More importantly, options may include -dparameter=value or -sparameter=string switches for setting "distiller parameters", Adobe's documented parameters for controlling the conversion process. The PostScript setdistillerparams and currentdistillerparams operators are also recognized when running ps2pdf, and provide an equivalent way to set these parameters from within the PostScript input file.
ps2pdf also recognizes the following options:
The following option controls a conversion into PDF/X-3:
When generating a PDF/X-3 document, Ghostscript performs the following special actions to satisfy the PDF/X-3 standard :
The following options control a conversion into PDF 1.2:
The following option controls a conversion into PDF 1.3:
Note that Adobe XMP specification requires DocumentID must be same for all versions of a document. Since Ghostscript does not provide a maintenance of document versions, users are responsible to provide a correct UUID through this parameter.
Note that Ghostscript has no assess to the host node ID due to a minimization of platform dependent modules. Therefore it uses an MD5 hash of the document contents for generating UUIDs.
Note that Adobe XMP specification requires instance ID must be inique for all versions of document. This parameter may be used to disable an unique ID generation for a debug purpose.
When none of DocumentUUID and InstanceUUID are specified, the generated DocumentID appears same as instance ID.
ps2pdf recognizes all of the Acrobat Distiller 5 parameters defined in the DistillerParameters document included in the Acrobat SDK. Cells in the table containing '=' mean that the value of the parameter is the same as in the "default" column.
Parameter name Notes default screen ebook printer prepress
AlwaysEmbed (13) [ ] = = = = AntiAliasColorImages (0) false = = = = AntiAliasGrayImages (0) false = = = = AntiAliasMonoImages (0) false = = = = ASCII85EncodePages false = = = = AutoFilterColorImages (1) true = = = = AutoFilterGrayImages (1) true = = = = AutoPositionEPSFiles (0) true = = = = AutoRotatePages /PageByPage /PageByPage /All /None /None Binding (0) /Left = = = = CalCMYKProfile (0) () = = = = CalGrayProfile (0) () = = = = CalRGBProfile (0) () = = = = CannotEmbedFontPolicy (0) /Warning /Warning /Warning /Warning /Error ColorACSImageDict (13) (note 7) (note 10) (note 10) (note 8) (note 9) ColorConversionStrategy (0,6) /LeaveColorUnchanged /sRGB /sRGB /UseDeviceIndependentColor /LeaveColorUnchanged ColorImageDepth -1 = = = = ColorImageDict (13) (note 7) = = = = ColorImageFilter /DCTEncode = = = = ColorImageDownsampleThreshold 1.5 = = = = ColorImageDownsampleType (3) /Subsample /Average /Bicubic /Bicubic /Bicubic ColorImageResolution 72 72 150 300 300 CompatibilityLevel 1.4 1.3 1.4 1.4 1.4 CompressPages true = = = = ConvertCMYKImagesToRGB false = = = = ConvertImagesToIndexed (0) false = = = = CoreDistVersion 4000 = = = = CreateJobTicket (0) false false false true true DefaultRenderingIntent /Default = = = = DetectBlends (0) true = = = = DoThumbnails (0) false false false false true DownsampleColorImages false true true false false DownsampleGrayImages false true true false false DownsampleMonoImages false true true false false EmbedAllFonts true false true true true EmitDSCWarnings (0) false = = = = EncodeColorImages true = = = = EncodeGrayImages true = = = = EncodeMonoImages true = = = = EndPage (0) -1 = = = = GrayACSImageDict (13) (note 7) (note 7) (note 10) (note 8) (note 9) GrayImageDepth -1 = = = = GrayImageDict (13) (note 7) = = = = GrayImageDownsampleThreshold 1.5 = = = = GrayImageDownsampleType (3) /Subsample /Average /Bicubic /Bicubic /Bicubic GrayImageFilter /DCTEncode = = = = GrayImageResolution 72 72 150 300 300 ImageMemory (0) 524288 = = = = LockDistillerParams false = = = = LZWEncodePages (2) false = = = = MaxSubsetPct 100 = = = = MonoImageDepth -1 = = = = MonoImageDict (13) <<K -1>> = = = = MonoImageDownsampleThreshold 1.5 = = = = MonoImageDownsampleType /Subsample /Average /Bicubic /Bicubic /Bicubic MonoImageFilter /CCITTFaxEncode = = = = MonoImageResolution 300 300 300 1200 1200 NeverEmbed (13) (note 11)(note 12) (note 11)(note 12) (note 11)(note 12) [ ](note 12) [ ](note 12) OffOptimizations 0 = = = = OPM 1 = = = = Optimize (0,5) false true true true true ParseDSCComments true = = = = ParseDSCCommentsForDocInfo true = = = = PreserveCopyPage (0) true = = = = PreserveEPSInfo (0) true = = = = PreserveHalftoneInfo false = = = = PreserveOPIComments (0) false false false true true PreserveOverprintSettings false false false true true sRGBProfile (0) () = = = = StartPage (0) 1 = = = = SubsetFonts true = = = = TransferFunctionInfo (4) /Preserve = = = = UCRandBGInfo /Remove /Remove /Remove /Preserve /Preserve UseFlateCompression (2) true = = = = UsePrologue (0) false = = = =
(note 0) This parameter can be set and queried, but currently has no effect.
(note 1) Currently, AutoFilterxxxImages doesn't examine the image to decide between JPEG and LZW or Flate compression: it always uses Flate compression. If you want to force JPEG compression, use -dAutoFilterxxxImages=false.
(note 2) Because of Unisys's threats regarding the Welch patent, ps2pdf does not actually use LZW compression: instead, it treats all requests for LZW compression as calling for Flate compression. Concomitantly, UseFlateCompression is treated as always on, and the value of this parameter is ignored as with note 0. Now that the patent has expired, we could change this should it become worthwhile.
(note 3) The xxxDownsampleType parameters can also have the value /Bicubic (a Distiller 4 feature), which is currently treated as equivalent to /Average.
(note 4) Currently, the transfer function is always applied. If the corresponding parameter is set to /Preserve, the function setting is also copied into the PDF file.
(note 5) Optimization (linearization) is implemented with a separate program, pdfopt input.pdf output.pdf; the Optimize parameter has no effect.
(note 6) Ghostscript specifics : The value UseDeviceIndependentColor requires the device parameter UseCIEColor to be set to true. The value UseDeviceIndependentColorForImages works same as UseDeviceIndependentColor. The value CMYK works with any CompatibilityLevel and requires the device parameter ProcessColorModel to be set to DeviceCMYK. The value sRGB requires the device parameter ProcessColorModel to be set to DeviceRGB, and actually converts to RBG with the default Ghostscript conversion. The new Ghostscript-specific value Gray requires the device parameter ProcessColorModel to be set to DeviceGray, and converts all colors to DeviceGray. The old Ghostscript-specific value UseDeviceDependentColor is now depricated. It is automaticly replaced with sRGB, CMYK, or Gray.
(note 7) The default image parameter dictionary is
<< /QFactor 0.9 /Blend 1 /HSamples [2 1 1 2] /VSamples [2 1 1 2] >>
(note 8) The printer ACS image parameter dictionary is
<< /QFactor 0.4 /Blend 1 /ColorTransform 1 /HSamples [1 1 1 1] /VSamples [1 1 1 1] >>
(note 9) The prepress ACS image parameter dictionary is
<< /QFactor 0.15 /Blend 1 /ColorTransform 1 /HSamples [1 1 1 1] /VSamples [1 1 1 1] >>
(note 10) The screen and ebook ACS image parameter dictionary is
<< /QFactor 0.76 /Blend 1 /ColorTransform 1 /HSamples [2 1 1 2] /VSamples [2 1 1 2] >>
(note 11) The default, screen, and ebook settings never embed the 14 standard fonts (Courier, Helvetica, and Times families, Symbol, and ZapfDingbats).
(note 12) NeverEmbed can include CID font names. If a CID font is substituted in lib/cidfmap, the substitute font name is used when the CID font is embedded, and the original CID font name is used when it is not embedded. NeverEmbed should always specify the original CID font name.
(note 13) The arrays AlwaysEmbed and NeverEmbed and image parameter dictionaries ColorACSImageDict, ColorACSImageDict, ColorImageDict, GrayACSImageDict, GrayImageDict, MonoImageDict cannot be specified on the ps2pdf command line. To specify these, you must use PostScript, either by including it in the PostScript source or by passing the -c command-line parameter to ghostscript as described in Limitations below. For example, including the PostScript string in your file in.ps:
<</AlwaysEmbed [/Helvetica /Times-Roman]>> setdistillerparamsis equivalent to invoking:
gs -dBATCH -dSAFER -DNOPAUSE -q -sDEVICE=pdfwrite -sOutputFile=out.pdf -c '.setpdfwrite <</AlwaysEmbed [/Helvetica /Times-Roman]>> setdistillerparams' -f in.psor using ps2pdf with the extra parameters in a file:
ps2pdf @params.in out.pdfwhere the file params.in contains:
-c '<</AlwaysEmbed [/Helvetica /Times-Roman]>> setdistillerparams' -f in.ps
To assist with creating a PostScript file suitable for conversion to PDF, ghostscript includes ghostpdf.ppd, a PostScript Printer Description (PPD) file. This allows some distiller parameters to be set when a PostScript file is generated.
To install a "Ghostscript PDF" printer on Windows XP, select the Windows Control Panel, Printers and Faxes, Add a Printer, Local Printer, Use port FILE: (Print to File), Have Disk..., select the directory containg ghostpdf.ppd and ghostpdf.inf, select "Ghostscript PDF", Replace existing driver (if asked), and answer the remaining questions appropriately. After installing, open the "Ghostscript PDF" properties, select the Device Settings tab, set "Mimimum Font Size to Download as Outline" to 0 pixels.
To set distiller parameters, select the "Ghostscript PDF" Printing Preferences, then the Advanced button. The PDF settings are under "Printer Features".
To create a PDF/X-3 document from a Postscript or a PDF file, you should :
As mentioned above, the PDF/X definition file provides a special information, which the PDF/X-3 standard requires. You can find a sample file in gs/lib/PDFX_def.ps, and edit it according to your needs. The file follows Postscript syntax and uses the operator pdfmark to pass the special information. For your comfort we marked editable lines in the sample file with the comment % Customize. They are explained below.
Rather the PDF/X-3 standard requires colors to be adjusted at the document generation time, Ghostscript does not perform any special color conversion. Either colors to be adjusted in advance, or a proper color conversion to be specified in /DefaultGray, DefaultRGB, DefaultCMYK resources of the ColorSpace resource category, and the -dUseCIEColor option to be specified to remap device colors into CIE colors. The choice of the ICC profile is also the user's responsibility.
Please note that if a graphic object can't embed into the output format, Ghostscript converts it into low level objects, using a device color space specified in the ProcessColorModel option. If you need to adjust those resulting colors, you may substitute them with CIE colors, running Ghostscript at second time . Performing both actions in a single pass is a subject of further improvements.
Ghostscript distribution does not contain an ICC profile to be used for creating a PDF/X-3 document. Users should either create an appropriate one themselves, or use one from a public domain, or create one with the PDF/X-3 inspector freeware.
The PDF/X-3 standard requires a TrimBox entry to be written for all page descriptions. This is an array of four offsets that specify how the page is to be trimmed after it has been printed. It is set to the same as MediaBox by default unless the PDFXTrimBoxToMediaBoxOffset distiller parameter is present. It accepts offsets to the MediaBox as an array [left right top bottom], e.g., the PostScript input code << /PDFXTrimBoxToMediaBoxOffset [10 20 30 40] >> setdistillerparams specifies that 10 points will be trimmed at the left, 20 points at the right, 30 points at the top, and 40 points at the bottom.
Another page entry is the BleedBox. It gives the area of the page to which actual output items may extend; cut marks, color bars etc. must be positioned in the area between the BleedBox and the MediaBox. The TrimBox is always contained within the BleedBox. By default, the PDFXSetBleedBoxToMediaBox distiller parameter is true, and the BleedBox is set to the same values as the MediaBox. If it is set to false, the PDFXBleedBoxToTrimBoxOffset parameter gives offset to the TrimBox. It accepts a four-value array in the same format as the PDFXTrimBoxToMediaBoxOffset parameter.
Here is a sample command line to invoke Ghostscript for generating a PDF/X-3 document :
gs -dPDFX -dBATCH -dNOPAUSE -dNOOUTERSAVE -dUseCIEColor -sDEVICE=pdfwrite -sOutputFile=out-x3.pdf PDFX_def.ps input.ps
To create a PDF/A document, please follow instructions about creating a PDF/X-3 document, with the following exceptions :
gs -dPDFA -dBATCH -dNOPAUSE -dNOOUTERSAVE -dUseCIEColor -sDEVICE=pdfwrite -sOutputFile=out-a.pdf PDFA_def.ps input.ps
ps2pdf will sometimes convert PostScript constructs to lower-level ones, even if a higher-level construct is available. For example, if the PostScript file uses charpath to set a clipping path consisting of text, ps2pdf will write the clipping path as a path in the PDF file, rather than as text, even though PDF is able to express clipping with text. This is only a performance issue, and will be improved incrementally over time.
Some applications, such as HIGZ, produce PostScript files that use ridiculously large coordinates. On such files, ps2pdf may cause a limitcheck error. If this occurs, try reducing the default internal resolution of 720 dpi by using the -r switch, e.g., ps2pdf -r300 somefile.ps.
ps2pdf ignores the PDF 1.3 (Acrobat 4.x) pdfmarks related to document content structure: StRoleMap, StClassMap, StPNE, StBookmarkRoot, StPush, StPop, StPopAll, StBMC, StBDC, EMC, StOBJ, StAttr, StStore, StRetrieve, NamespacePush, NamespacePop, and NI. While this causes some structural information to be omitted from the output file, the displayed and printed output are normally not affected.
ps2pdf currently has only very limited support for PDF 1.4. It writes out the blend mode, constant alpha, and text knockout graphics state parameters, and it handles images with soft masks, but it does not handle transparency groups, or soft masks in the graphics state. (Note that there is no standard way to specify any of these things in PostScript, so these statements only apply when the input file is already a PDF 1.4 file.)
ps2pdf provides a simplified interface to the Ghostscript command line. It is not possible to use -c option directly or pass multiple source files. For the unrestricted access to the command line parameters, use Ghostscript directly as in:
gs -q -dSAFER -dNOPAUSE -dBATCH -sOutputFile=file.pdf [more options] \or create a parameter file with the -c option and/or the multiple input files:
-sDEVICE=pdfwrite -c .setpdfwrite -f source1.ps [more files]
ps2pdf @params.in out.pdfwhere the file params.in contains:
-c Postscript commands -f source1.ps [more files]See Language.htm for details of the .setpdfwrite operator.
Distiller parameters should only be saved by save and restored by restore, but they are also saved by gsave and restored by grestore.
Changing the value of the CompressPages parameter after any marks have been made on the page may cause a crash.
Ghostscript has been writing incorrect ToUnicode CMap without CMapName into the PDF since version 8.10 (rev. 3611) . This bug is fixed in version 8.54 (rev. 6201). We recommend to re-generate PDF files created by the affected Ghostscript versions. Since version 8.54 (rev. 6590) Ghostscript can read the incorrect PDF files.
According to users, the greatest benefit of ps2pdf is that it is more robust than Acrobat Distiller: it will process complex and difficult PostScript files that Acrobat Distiller is not able to handle.
For certain documents, ps2pdf is much faster than Adobe Distiller, and may be suitable for run-time conversions. George White, a heavy user of ps2pdf, remarks:
I haven't seen a head to head comparison, but Distiller seems slower when running on what should be a faster system (for instance, Distiller on a PPC Mac vs a 25 MHz 68040 NeXT running ps2pdf), so I think this is fair -- also, one of Mark Doyle's postings indicated that Distiller was not fast enough for use as a run-time server. In contrast, I find that I can use ps2pdf as a post-processor during routine document creation.
On the other hand, there are some documents for which ps2pdf may be much slower than Acrobat Distiller. Caveat user.
ps2pdf usually produces output that is comparable in size to the output of Acrobat Distiller; however, it sometimes produces much larger output, especially if the input file involves pattern fills.
Many users report that the combination of ps2pdf with Acrobat Reader is superior to using a generic PostScript viewer (psview or ghostview), particularly for documents with many pages where the navigational support in PDF files reduces the overhead involved in navigating conventional PostScript documents.
Thanks to George N. White III <aa056@chebucto.ns.ca> of the Ocean Sciences Division of the Bedford Institute of Oceanography in Dartmouth, Nova Scotia for extensive testing of early versions of ps2pdf, and for contributing most of this writeup.
Thanks to Martin Hosken of SIL International <http://www.sil.org> for help with testing ps2pdf with a wide variety of international fonts.
Copyright © 1996, 2000, 2004 artofcode LLC. All rights reserved.
This software is provided AS-IS with no warranty, either express or implied. This software is distributed under license and may not be copied, modified or distributed except as expressly authorized under the terms of the license contained in the file LICENSE in this distribution. For more information about licensing, please refer to http://www.ghostscript.com/licensing/. For information on commercial licensing, go to http://www.artifex.com/licensing/ or contact Artifex Software, Inc., 101 Lucas Valley Road #110, San Rafael, CA 94903, U.S.A., +1(415)492-9861.
Ghostscript version 8.53, 20 October 2005